ros-skill
بواسطة lpigeon
Web & Frontend Developmentموجز
Controls ROS/ROS2 robots via rosbridge WebSocket CLI.
الوصف
ما الذي تفعله هذه المهارة
Controls ROS and ROS2 robots through a rosbridge WebSocket connection using a Python CLI. Supports topics, services, nodes, parameters, and actions. All output is JSON.
Lets an agent interact with any ROS/ROS2 robot without needing a native ROS install on the agent host, only rosbridge on the robot side.
متى تستخدمها
- Move a robot forward and stop it after a set duration
- Subscribe to laser scan data from a sensor
- Call a ROS service to spawn or reset simulation objects
- Set ROS2 node parameters at runtime
- Inspect active topics and nodes on an unfamiliar robot
مثال على سير العمل
User asks: move the robot forward 2 seconds then stop
- 1
Connect to rosbridge with
ros_cli.py connect - 2
Check message structure with
topics message geometry_msgs/Twist - 3
Publish a sequence with forward velocity for 2.0s followed by zero velocity for 0.5s using
topics publish-sequence - 4
Verify no error field in JSON output
Robot moves forward for 2 seconds and stops; publish-sequence confirms completion
المتطلبات
- rosbridge_server installed and running on the robot (ROS or ROS2)
التثبيت
clawhub install lpigeon/ros-skillشغّل أمر واجهة سطر الأوامر، أو الصق النص في Claude Code أو Cursor أو Codex أو أي وكيل برمجة تستخدمه.