dht11-temp
von noahseeger
Smart Home & IoTKurzbeschreibung
Read temperature and humidity from DHT11 sensor.
Beschreibung
Was dieser Skill macht
Reads temperature and humidity from a DHT11 sensor connected to a Raspberry Pi. The GPIO pin is configurable via CLI argument or environment variable, defaulting to pin 19.
Supports both CLI argument and environment variable pin configuration, making it easy to use in automated scripts without editing code.
Wann du ihn einsetzt
- Logging greenhouse temperature every 30 minutes via cron
- Monitoring humidity in a server room or basement
- Building a home weather station with a Pi
- Alerting when humidity exceeds a threshold in a script
- Capturing sensor data to a file for later analysis
Beispiel-Workflow
User asks: read the current temperature and humidity from the DHT11 on GPIO 4
- 1
Sets DHT_PIN=4 or passes 4 as a CLI argument
- 2
Runs sudo python3 scripts/dht/main.py 4
- 3
Captures stdout output
- 4
Parses line 1 as temperature in Celsius and line 2 as humidity percentage
Temperature: 22.5°C, Humidity: 58%
Voraussetzungen
- Raspberry Pi with GPIO pins
- DHT11 sensor and 10K pull-up resistor (hardware)
- RPi.GPIO Python package (pip3 install RPi.GPIO)
Installation
clawhub install noahseeger/dht11-tempFühre den CLI-Befehl aus oder füge den Prompt in Claude Code, Cursor, Codex oder deinen Coding-Agenten ein.