Zum Inhalt springen
TakoAPI
Zurück zu den Skills

bambu-local

von tanguyvans

Smart Home & IoT
2.1kDownloadzahlen laut clawskills.sh
2Sterne
0Aufrufe
0 LikesMelde dich an, um diesen Skill zu liken
—Noch nicht bewertet
Deine Bewertung

Kurzbeschreibung

Control Bambu Lab 3D printers locally via MQTT.

Beschreibung

Was dieser Skill macht

Controls Bambu Lab 3D printers over a local MQTT connection, bypassing the manufacturer's cloud. Supports status checks, print control, temperature adjustments, speed changes, and raw G-code commands. Requires LAN Only Mode enabled on the printer.

Works without Bambu's cloud servers, so printer control stays available during internet outages or when the printer is on an isolated network.

Wann du ihn einsetzt

  • Check remaining print time without opening Bambu Studio
  • Pause a print when you notice a layer adhesion problem
  • Lower bed temperature mid-print to reduce warping
  • Turn the chamber light off after a print finishes
  • Switch print speed to Silent mode during an overnight job

Beispiel-Workflow

EINGABE

User asks: what's the current status of my printer?

AGENT
  1. 1

    Reads printer IP, access code, and serial from config.json

  2. 2

    Connects to the printer via local MQTT

  3. 3

    Subscribes to the printer's status report topic

  4. 4

    Parses the returned payload for print state, temperatures, and progress

  5. 5

    Returns a summary of current printer status

AUSGABE

Printer is printing layer 42/120, nozzle at 200°C, bed at 60°C, 35% complete

Voraussetzungen

  • Printer local IP address
  • Access code from printer Settings → LAN Only Mode
  • Printer serial number from printer Settings → Device

Installation

clawhub install tanguyvans/bambu-local

Führe den CLI-Befehl aus oder füge den Prompt in Claude Code, Cursor, Codex oder deinen Coding-Agenten ein.

Links