Saltar al contenido
TakoAPI
Volver a skills

bambu-local

por tanguyvans

Smart Home & IoT
2.1kDescargas según clawskills.sh
2Estrellas
0Vistas
0 me gustaInicia sesión para dar me gusta a esta skill
—Aún sin valoraciones
Tu valoración

Resumen

Control Bambu Lab 3D printers locally via MQTT.

Descripción

Qué hace esta skill

Controls Bambu Lab 3D printers over a local MQTT connection, bypassing the manufacturer's cloud. Supports status checks, print control, temperature adjustments, speed changes, and raw G-code commands. Requires LAN Only Mode enabled on the printer.

Works without Bambu's cloud servers, so printer control stays available during internet outages or when the printer is on an isolated network.

Cuándo usarla

  • Check remaining print time without opening Bambu Studio
  • Pause a print when you notice a layer adhesion problem
  • Lower bed temperature mid-print to reduce warping
  • Turn the chamber light off after a print finishes
  • Switch print speed to Silent mode during an overnight job

Flujo de trabajo de ejemplo

ENTRADA

User asks: what's the current status of my printer?

AGENTE
  1. 1

    Reads printer IP, access code, and serial from config.json

  2. 2

    Connects to the printer via local MQTT

  3. 3

    Subscribes to the printer's status report topic

  4. 4

    Parses the returned payload for print state, temperatures, and progress

  5. 5

    Returns a summary of current printer status

SALIDA

Printer is printing layer 42/120, nozzle at 200°C, bed at 60°C, 35% complete

Requisitos

  • Printer local IP address
  • Access code from printer Settings → LAN Only Mode
  • Printer serial number from printer Settings → Device

Instalación

clawhub install tanguyvans/bambu-local

Ejecuta el comando de la CLI o pega el prompt en Claude Code, Cursor, Codex o el agente de programación que uses.

Enlaces