Aller au contenu
TakoAPI
Retour aux skills

bambu-local

par tanguyvans

Smart Home & IoT
2.1kTéléchargements rapportés par clawskills.sh
2Étoiles
0Vues
0 mention J'aimeConnecte-toi pour aimer ce skill
—Pas encore noté
Ta note

Résumé

Control Bambu Lab 3D printers locally via MQTT.

Description

Ce que fait ce skill

Controls Bambu Lab 3D printers over a local MQTT connection, bypassing the manufacturer's cloud. Supports status checks, print control, temperature adjustments, speed changes, and raw G-code commands. Requires LAN Only Mode enabled on the printer.

Works without Bambu's cloud servers, so printer control stays available during internet outages or when the printer is on an isolated network.

Quand l'utiliser

  • Check remaining print time without opening Bambu Studio
  • Pause a print when you notice a layer adhesion problem
  • Lower bed temperature mid-print to reduce warping
  • Turn the chamber light off after a print finishes
  • Switch print speed to Silent mode during an overnight job

Exemple de workflow

ENTRÉE

User asks: what's the current status of my printer?

AGENT
  1. 1

    Reads printer IP, access code, and serial from config.json

  2. 2

    Connects to the printer via local MQTT

  3. 3

    Subscribes to the printer's status report topic

  4. 4

    Parses the returned payload for print state, temperatures, and progress

  5. 5

    Returns a summary of current printer status

SORTIE

Printer is printing layer 42/120, nozzle at 200°C, bed at 60°C, 35% complete

Prérequis

  • Printer local IP address
  • Access code from printer Settings → LAN Only Mode
  • Printer serial number from printer Settings → Device

Installation

clawhub install tanguyvans/bambu-local

Exécute la commande CLI, ou colle l'instruction dans Claude Code, Cursor, Codex ou l'agent de code que tu utilises.

Liens