कंटेंट पर जाएँ
TakoAPI
स्किल्स पर वापस

dirigera-control

falderebet द्वारा

Smart Home & IoT
1.9kclawskills.sh द्वारा बताए गए डाउनलोड
2स्टार
0व्यूज़
0 लाइकइस स्किल को लाइक करने के लिए साइन इन करें
—अभी तक कोई रेटिंग नहीं
आपकी रेटिंग

संक्षिप्त

Control IKEA Dirigera smart home devices.

विवरण

यह स्किल क्या करती है

Controls IKEA Dirigera smart home devices including lights, outlets, and scenes via the Dirigera hub API. Supports brightness, color temperature, outlet switching, and scene triggering. Accessible remotely through a Cloudflare tunnel.

Provides programmatic control over the full Dirigera device ecosystem without needing the IKEA Home Smart app or manual interaction.

इसे कब इस्तेमाल करें

  • Turn off all lights when leaving home
  • Trigger a bedtime scene across multiple rooms
  • Check battery levels on smart controllers
  • Dim bedroom light to a specific brightness
  • Turn on a connected outlet for a device

उदाहरण वर्कफ़्लो

इनपुट

User asks: Set the bedroom light to warm white at 50% brightness

एजेंट
  1. 1

    Connect to the Dirigera hub using stored token and IP address

  2. 2

    Retrieve the bedroom light by name with hub.get_light_by_name()

  3. 3

    Check device.is_reachable before sending commands

  4. 4

    Set brightness to 50 with light.set_light_level(light_level=50)

  5. 5

    Set color temperature to 2700K with light.set_color_temperature(color_temp=2700), then call light.reload()

आउटपुट

Bedroom light is now on at 50% brightness with warm white color temperature

आवश्यकताएँ

  • Dirigera hub IP address (from router DHCP list)
  • Dirigera API token (generated by pressing physical button on hub)

इंस्टॉलेशन

clawhub install falderebet/dirigera-control

CLI कमांड चलाएँ, या प्रॉम्प्ट को Claude Code, Cursor, Codex या जो भी कोडिंग एजेंट आप इस्तेमाल करते हैं उसमें पेस्ट करें।

लिंक