कंटेंट पर जाएँ
TakoAPI
स्किल्स पर वापस

ros-skill

lpigeon द्वारा

Web & Frontend Development
292clawskills.sh द्वारा बताए गए डाउनलोड
1व्यूज़
0 लाइकइस स्किल को लाइक करने के लिए साइन इन करें
—अभी तक कोई रेटिंग नहीं
आपकी रेटिंग

संक्षिप्त

Controls ROS/ROS2 robots via rosbridge WebSocket CLI.

विवरण

यह स्किल क्या करती है

Controls ROS and ROS2 robots through a rosbridge WebSocket connection using a Python CLI. Supports topics, services, nodes, parameters, and actions. All output is JSON.

Lets an agent interact with any ROS/ROS2 robot without needing a native ROS install on the agent host, only rosbridge on the robot side.

इसे कब इस्तेमाल करें

  • Move a robot forward and stop it after a set duration
  • Subscribe to laser scan data from a sensor
  • Call a ROS service to spawn or reset simulation objects
  • Set ROS2 node parameters at runtime
  • Inspect active topics and nodes on an unfamiliar robot

उदाहरण वर्कफ़्लो

इनपुट

User asks: move the robot forward 2 seconds then stop

एजेंट
  1. 1

    Connect to rosbridge with ros_cli.py connect

  2. 2

    Check message structure with topics message geometry_msgs/Twist

  3. 3

    Publish a sequence with forward velocity for 2.0s followed by zero velocity for 0.5s using topics publish-sequence

  4. 4

    Verify no error field in JSON output

आउटपुट

Robot moves forward for 2 seconds and stops; publish-sequence confirms completion

आवश्यकताएँ

  • rosbridge_server installed and running on the robot (ROS or ROS2)

इंस्टॉलेशन

clawhub install lpigeon/ros-skill

CLI कमांड चलाएँ, या प्रॉम्प्ट को Claude Code, Cursor, Codex या जो भी कोडिंग एजेंट आप इस्तेमाल करते हैं उसमें पेस्ट करें।

लिंक