कंटेंट पर जाएँ
TakoAPI
स्किल्स पर वापस

bambu-cli

tobiasbischoff द्वारा

Smart Home & IoT
2.5kclawskills.sh द्वारा बताए गए डाउनलोड
9स्टार
0व्यूज़
0 लाइकइस स्किल को लाइक करने के लिए साइन इन करें
—अभी तक कोई रेटिंग नहीं
आपकी रेटिंग

संक्षिप्त

Operate and troubleshoot BambuLab printers with the bambu-cli.

विवरण

यह स्किल क्या करती है

Controls BambuLab 3D printers from the command line via MQTT, FTPS, and camera protocols. Covers print lifecycle management, file transfers, hardware controls (temperatures, fans, light, motion), calibration, and live monitoring.

Automates and scripts printer operations that would otherwise require manual interaction through the BambuLab app or touchscreen.

इसे कब इस्तेमाल करें

  • Starting a print job from a remote SSH session
  • Checking printer status in a CI/CD pipeline
  • Taking a camera snapshot mid-print without opening the app
  • Uploading and managing gcode files on the printer
  • Running bed leveling calibration before a long print

उदाहरण वर्कफ़्लो

इनपुट

User asks: start printing my_part.3mf on plate 2 and watch the status

एजेंट
  1. 1

    Verify printer profile is configured with bambu-cli config list

  2. 2

    Upload and start the print: bambu-cli print start my_part.3mf --plate 2

  3. 3

    Confirm the print started successfully from command output

  4. 4

    Begin periodic monitoring: bambu-cli watch --interval 10

आउटपुट

Print job started on plate 2; live status updates show layer progress, temperatures, and estimated time remaining

आवश्यकताएँ

  • BambuLab printer access code (obtained from printer network settings)
  • bambu-cli installed

इंस्टॉलेशन

clawhub install tobiasbischoff/bambu-cli

CLI कमांड चलाएँ, या प्रॉम्प्ट को Claude Code, Cursor, Codex या जो भी कोडिंग एजेंट आप इस्तेमाल करते हैं उसमें पेस्ट करें।

लिंक