Lewati ke konten
TakoAPI
Kembali ke skill

dht11-temp

oleh noahseeger

Smart Home & IoT
398Unduhan dilaporkan oleh clawskills.sh
2Bintang
0Tayangan
0 sukaMasuk untuk menyukai skill ini
—Belum ada penilaian
Penilaian Anda

Ringkasan

Read temperature and humidity from DHT11 sensor.

Deskripsi

Apa yang Dilakukan Skill Ini

Reads temperature and humidity from a DHT11 sensor connected to a Raspberry Pi. The GPIO pin is configurable via CLI argument or environment variable, defaulting to pin 19.

Supports both CLI argument and environment variable pin configuration, making it easy to use in automated scripts without editing code.

Kapan Menggunakannya

  • Logging greenhouse temperature every 30 minutes via cron
  • Monitoring humidity in a server room or basement
  • Building a home weather station with a Pi
  • Alerting when humidity exceeds a threshold in a script
  • Capturing sensor data to a file for later analysis

Contoh Alur Kerja

INPUT

User asks: read the current temperature and humidity from the DHT11 on GPIO 4

AGENT
  1. 1

    Sets DHT_PIN=4 or passes 4 as a CLI argument

  2. 2

    Runs sudo python3 scripts/dht/main.py 4

  3. 3

    Captures stdout output

  4. 4

    Parses line 1 as temperature in Celsius and line 2 as humidity percentage

OUTPUT

Temperature: 22.5°C, Humidity: 58%

Persyaratan

  • Raspberry Pi with GPIO pins
  • DHT11 sensor and 10K pull-up resistor (hardware)
  • RPi.GPIO Python package (pip3 install RPi.GPIO)

Instalasi

clawhub install noahseeger/dht11-temp

Jalankan perintah CLI-nya, atau tempel prompt ke Claude Code, Cursor, Codex, atau coding agent apa pun yang Anda pakai.

Tautan