Lewati ke konten
TakoAPI
Kembali ke skill

bambu-cli

oleh tobiasbischoff

Smart Home & IoT
2.5kUnduhan dilaporkan oleh clawskills.sh
9Bintang
0Tayangan
0 sukaMasuk untuk menyukai skill ini
—Belum ada penilaian
Penilaian Anda

Ringkasan

Operate and troubleshoot BambuLab printers with the bambu-cli.

Deskripsi

Apa yang Dilakukan Skill Ini

Controls BambuLab 3D printers from the command line via MQTT, FTPS, and camera protocols. Covers print lifecycle management, file transfers, hardware controls (temperatures, fans, light, motion), calibration, and live monitoring.

Automates and scripts printer operations that would otherwise require manual interaction through the BambuLab app or touchscreen.

Kapan Menggunakannya

  • Starting a print job from a remote SSH session
  • Checking printer status in a CI/CD pipeline
  • Taking a camera snapshot mid-print without opening the app
  • Uploading and managing gcode files on the printer
  • Running bed leveling calibration before a long print

Contoh Alur Kerja

INPUT

User asks: start printing my_part.3mf on plate 2 and watch the status

AGENT
  1. 1

    Verify printer profile is configured with bambu-cli config list

  2. 2

    Upload and start the print: bambu-cli print start my_part.3mf --plate 2

  3. 3

    Confirm the print started successfully from command output

  4. 4

    Begin periodic monitoring: bambu-cli watch --interval 10

OUTPUT

Print job started on plate 2; live status updates show layer progress, temperatures, and estimated time remaining

Persyaratan

  • BambuLab printer access code (obtained from printer network settings)
  • bambu-cli installed

Instalasi

clawhub install tobiasbischoff/bambu-cli

Jalankan perintah CLI-nya, atau tempel prompt ke Claude Code, Cursor, Codex, atau coding agent apa pun yang Anda pakai.

Tautan