Vai al contenuto
TakoAPI
Torna alle skill

bambu-local

di tanguyvans

Smart Home & IoT
2.1kDownload riportati da clawskills.sh
2Stelle
0Visualizzazioni
0 likeAccedi per mettere like a questa skill
—Non ancora valutato
La tua valutazione

Sintesi

Control Bambu Lab 3D printers locally via MQTT.

Descrizione

Cosa fa questa skill

Controls Bambu Lab 3D printers over a local MQTT connection, bypassing the manufacturer's cloud. Supports status checks, print control, temperature adjustments, speed changes, and raw G-code commands. Requires LAN Only Mode enabled on the printer.

Works without Bambu's cloud servers, so printer control stays available during internet outages or when the printer is on an isolated network.

Quando usarla

  • Check remaining print time without opening Bambu Studio
  • Pause a print when you notice a layer adhesion problem
  • Lower bed temperature mid-print to reduce warping
  • Turn the chamber light off after a print finishes
  • Switch print speed to Silent mode during an overnight job

Esempio di workflow

INPUT

User asks: what's the current status of my printer?

AGENT
  1. 1

    Reads printer IP, access code, and serial from config.json

  2. 2

    Connects to the printer via local MQTT

  3. 3

    Subscribes to the printer's status report topic

  4. 4

    Parses the returned payload for print state, temperatures, and progress

  5. 5

    Returns a summary of current printer status

OUTPUT

Printer is printing layer 42/120, nozzle at 200°C, bed at 60°C, 35% complete

Requisiti

  • Printer local IP address
  • Access code from printer Settings → LAN Only Mode
  • Printer serial number from printer Settings → Device

Installazione

clawhub install tanguyvans/bambu-local

Esegui il comando CLI oppure incolla il prompt in Claude Code, Cursor, Codex o nell'agente di coding che usi.

Link