dirigera-control
falderebet 제작
Smart Home & IoT요약
Control IKEA Dirigera smart home devices.
설명
이 스킬이 하는 일
Controls IKEA Dirigera smart home devices including lights, outlets, and scenes via the Dirigera hub API. Supports brightness, color temperature, outlet switching, and scene triggering. Accessible remotely through a Cloudflare tunnel.
Provides programmatic control over the full Dirigera device ecosystem without needing the IKEA Home Smart app or manual interaction.
사용 시점
- Turn off all lights when leaving home
- Trigger a bedtime scene across multiple rooms
- Check battery levels on smart controllers
- Dim bedroom light to a specific brightness
- Turn on a connected outlet for a device
예시 워크플로
User asks: Set the bedroom light to warm white at 50% brightness
- 1
Connect to the Dirigera hub using stored token and IP address
- 2
Retrieve the bedroom light by name with hub.get_light_by_name()
- 3
Check device.is_reachable before sending commands
- 4
Set brightness to 50 with light.set_light_level(light_level=50)
- 5
Set color temperature to 2700K with light.set_color_temperature(color_temp=2700), then call light.reload()
Bedroom light is now on at 50% brightness with warm white color temperature
요구 사항
- Dirigera hub IP address (from router DHCP list)
- Dirigera API token (generated by pressing physical button on hub)
설치
clawhub install falderebet/dirigera-controlCLI 명령을 실행하거나, 프롬프트를 Claude Code, Cursor, Codex 등 사용하는 코딩 에이전트에 붙여넣으세요.