본문으로 건너뛰기
TakoAPI
스킬로 돌아가기

ros-skill

lpigeon 제작

Web & Frontend Development
292clawskills.sh가 보고한 다운로드 수
1조회수
좋아요 0개로그인하면 이 스킬에 좋아요를 누를 수 있습니다
—아직 평가 없음
내 평가

요약

Controls ROS/ROS2 robots via rosbridge WebSocket CLI.

설명

이 스킬이 하는 일

Controls ROS and ROS2 robots through a rosbridge WebSocket connection using a Python CLI. Supports topics, services, nodes, parameters, and actions. All output is JSON.

Lets an agent interact with any ROS/ROS2 robot without needing a native ROS install on the agent host, only rosbridge on the robot side.

사용 시점

  • Move a robot forward and stop it after a set duration
  • Subscribe to laser scan data from a sensor
  • Call a ROS service to spawn or reset simulation objects
  • Set ROS2 node parameters at runtime
  • Inspect active topics and nodes on an unfamiliar robot

예시 워크플로

입력

User asks: move the robot forward 2 seconds then stop

에이전트
  1. 1

    Connect to rosbridge with ros_cli.py connect

  2. 2

    Check message structure with topics message geometry_msgs/Twist

  3. 3

    Publish a sequence with forward velocity for 2.0s followed by zero velocity for 0.5s using topics publish-sequence

  4. 4

    Verify no error field in JSON output

출력

Robot moves forward for 2 seconds and stops; publish-sequence confirms completion

요구 사항

  • rosbridge_server installed and running on the robot (ROS or ROS2)

설치

clawhub install lpigeon/ros-skill

CLI 명령을 실행하거나, 프롬프트를 Claude Code, Cursor, Codex 등 사용하는 코딩 에이전트에 붙여넣으세요.

링크