본문으로 건너뛰기
TakoAPI
스킬로 돌아가기

bambu-local

tanguyvans 제작

Smart Home & IoT
2.1kclawskills.sh가 보고한 다운로드 수
2스타
0조회수
좋아요 0개로그인하면 이 스킬에 좋아요를 누를 수 있습니다
—아직 평가 없음
내 평가

요약

Control Bambu Lab 3D printers locally via MQTT.

설명

이 스킬이 하는 일

Controls Bambu Lab 3D printers over a local MQTT connection, bypassing the manufacturer's cloud. Supports status checks, print control, temperature adjustments, speed changes, and raw G-code commands. Requires LAN Only Mode enabled on the printer.

Works without Bambu's cloud servers, so printer control stays available during internet outages or when the printer is on an isolated network.

사용 시점

  • Check remaining print time without opening Bambu Studio
  • Pause a print when you notice a layer adhesion problem
  • Lower bed temperature mid-print to reduce warping
  • Turn the chamber light off after a print finishes
  • Switch print speed to Silent mode during an overnight job

예시 워크플로

입력

User asks: what's the current status of my printer?

에이전트
  1. 1

    Reads printer IP, access code, and serial from config.json

  2. 2

    Connects to the printer via local MQTT

  3. 3

    Subscribes to the printer's status report topic

  4. 4

    Parses the returned payload for print state, temperatures, and progress

  5. 5

    Returns a summary of current printer status

출력

Printer is printing layer 42/120, nozzle at 200°C, bed at 60°C, 35% complete

요구 사항

  • Printer local IP address
  • Access code from printer Settings → LAN Only Mode
  • Printer serial number from printer Settings → Device

설치

clawhub install tanguyvans/bambu-local

CLI 명령을 실행하거나, 프롬프트를 Claude Code, Cursor, Codex 등 사용하는 코딩 에이전트에 붙여넣으세요.

링크