icom-7610
от morozsm
Smart Home & IoTКратко
Control an Icom IC-7610 transceiver over USB/LAN.
Описание
Что делает этот навык
Controls an Icom IC-7610 transceiver over USB or LAN. Reads and sets frequency, mode, and transmit power, and supports CW keying, beacon loops, and remote power on/off. Built-in safety checks enforce amateur band limits, SWR thresholds, and operator confirmation before any RF transmission.
Auto-detects the active connection method (rigctld LAN, flrig XML-RPC, or direct serial) so the same commands work without reconfiguring when switching setups.
Когда его использовать
- Set frequency and mode before a FT8 session on 20m
- Check S-meter and SWR readings during a contest
- Run a timed CW beacon on 10m with configurable repeat interval
- Remotely power the radio on or off from across the house
- Cap transmit power to 5W for a QRP operating session
Пример сценария
User asks: Send a 3-repeat CW beacon on 14.055 MHz
- 1
Check SWR via rigctl to confirm antenna is within safe limits
- 2
Set VFO frequency to 14055000 Hz
- 3
Confirm frequency falls within the 20m amateur band segment
- 4
Request operator confirmation before keying the transmitter
- 5
Send the CW beacon string 3 times with configured interval between repeats
Beacon transmitted 3 times on 14.055 MHz; SWR and band checks passed, operator confirmed
Требования
- CALLSIGN environment variable (required for CW and beacon)
- Hamlib — brew install hamlib
- wfview app for LAN control (optional) — wfview.org/download
Установка
clawhub install morozsm/icom-7610Выполните команду CLI или вставьте промпт в Claude Code, Cursor, Codex — любой кодинг-агент, которым пользуетесь.