Перейти к содержимому
TakoAPI
Назад к навыкам

dht11-temp

от noahseeger

Smart Home & IoT
398Число загрузок по данным clawskills.sh
2Звёзды
0Просмотры
0 лайковВойдите, чтобы поставить лайк навыку
—Ещё нет оценок
Ваша оценка

Кратко

Read temperature and humidity from DHT11 sensor.

Описание

Что делает этот навык

Reads temperature and humidity from a DHT11 sensor connected to a Raspberry Pi. The GPIO pin is configurable via CLI argument or environment variable, defaulting to pin 19.

Supports both CLI argument and environment variable pin configuration, making it easy to use in automated scripts without editing code.

Когда его использовать

  • Logging greenhouse temperature every 30 minutes via cron
  • Monitoring humidity in a server room or basement
  • Building a home weather station with a Pi
  • Alerting when humidity exceeds a threshold in a script
  • Capturing sensor data to a file for later analysis

Пример сценария

ВВОД

User asks: read the current temperature and humidity from the DHT11 on GPIO 4

АГЕНТ
  1. 1

    Sets DHT_PIN=4 or passes 4 as a CLI argument

  2. 2

    Runs sudo python3 scripts/dht/main.py 4

  3. 3

    Captures stdout output

  4. 4

    Parses line 1 as temperature in Celsius and line 2 as humidity percentage

ВЫВОД

Temperature: 22.5°C, Humidity: 58%

Требования

  • Raspberry Pi with GPIO pins
  • DHT11 sensor and 10K pull-up resistor (hardware)
  • RPi.GPIO Python package (pip3 install RPi.GPIO)

Установка

clawhub install noahseeger/dht11-temp

Выполните команду CLI или вставьте промпт в Claude Code, Cursor, Codex — любой кодинг-агент, которым пользуетесь.

Ссылки