Перейти к содержимому
TakoAPI
Назад к навыкам

bambu-local

от tanguyvans

Smart Home & IoT
2.1kЧисло загрузок по данным clawskills.sh
2Звёзды
0Просмотры
0 лайковВойдите, чтобы поставить лайк навыку
—Ещё нет оценок
Ваша оценка

Кратко

Control Bambu Lab 3D printers locally via MQTT.

Описание

Что делает этот навык

Controls Bambu Lab 3D printers over a local MQTT connection, bypassing the manufacturer's cloud. Supports status checks, print control, temperature adjustments, speed changes, and raw G-code commands. Requires LAN Only Mode enabled on the printer.

Works without Bambu's cloud servers, so printer control stays available during internet outages or when the printer is on an isolated network.

Когда его использовать

  • Check remaining print time without opening Bambu Studio
  • Pause a print when you notice a layer adhesion problem
  • Lower bed temperature mid-print to reduce warping
  • Turn the chamber light off after a print finishes
  • Switch print speed to Silent mode during an overnight job

Пример сценария

ВВОД

User asks: what's the current status of my printer?

АГЕНТ
  1. 1

    Reads printer IP, access code, and serial from config.json

  2. 2

    Connects to the printer via local MQTT

  3. 3

    Subscribes to the printer's status report topic

  4. 4

    Parses the returned payload for print state, temperatures, and progress

  5. 5

    Returns a summary of current printer status

ВЫВОД

Printer is printing layer 42/120, nozzle at 200°C, bed at 60°C, 35% complete

Требования

  • Printer local IP address
  • Access code from printer Settings → LAN Only Mode
  • Printer serial number from printer Settings → Device

Установка

clawhub install tanguyvans/bambu-local

Выполните команду CLI или вставьте промпт в Claude Code, Cursor, Codex — любой кодинг-агент, которым пользуетесь.

Ссылки