Skip to content
TakoAPI
Back to skills

ros-skill

by lpigeon

Web & Frontend Development
292Downloads reported by clawskills.sh
1Views
0 likesSign in to like this skill
—Not yet rated
Your rating

Brief

Controls ROS/ROS2 robots via rosbridge WebSocket CLI.

Description

What This Skill Does

Controls ROS and ROS2 robots through a rosbridge WebSocket connection using a Python CLI. Supports topics, services, nodes, parameters, and actions. All output is JSON.

Lets an agent interact with any ROS/ROS2 robot without needing a native ROS install on the agent host, only rosbridge on the robot side.

When to Use It

  • Move a robot forward and stop it after a set duration
  • Subscribe to laser scan data from a sensor
  • Call a ROS service to spawn or reset simulation objects
  • Set ROS2 node parameters at runtime
  • Inspect active topics and nodes on an unfamiliar robot

Example Workflow

INPUT

User asks: move the robot forward 2 seconds then stop

AGENT
  1. 1

    Connect to rosbridge with ros_cli.py connect

  2. 2

    Check message structure with topics message geometry_msgs/Twist

  3. 3

    Publish a sequence with forward velocity for 2.0s followed by zero velocity for 0.5s using topics publish-sequence

  4. 4

    Verify no error field in JSON output

OUTPUT

Robot moves forward for 2 seconds and stops; publish-sequence confirms completion

Requirements

  • rosbridge_server installed and running on the robot (ROS or ROS2)

Installation

clawhub install lpigeon/ros-skill

Run the CLI command, or paste the prompt into Claude Code, Cursor, Codex or whichever coding agent you use.

Links