İçeriğe geç
TakoAPI
Becerilere dön

dht11-temp

noahseeger tarafından

Smart Home & IoT
398İndirme sayıları clawskills.sh tarafından bildirilir
2Yıldızlar
0Görüntülenmeler
0 beğeniBu beceriyi beğenmek için giriş yapın
—Henüz değerlendirilmedi
Puanınız

Özet

Read temperature and humidity from DHT11 sensor.

Açıklama

Bu Beceri Ne Yapar

Reads temperature and humidity from a DHT11 sensor connected to a Raspberry Pi. The GPIO pin is configurable via CLI argument or environment variable, defaulting to pin 19.

Supports both CLI argument and environment variable pin configuration, making it easy to use in automated scripts without editing code.

Ne Zaman Kullanılır

  • Logging greenhouse temperature every 30 minutes via cron
  • Monitoring humidity in a server room or basement
  • Building a home weather station with a Pi
  • Alerting when humidity exceeds a threshold in a script
  • Capturing sensor data to a file for later analysis

Örnek İş Akışı

GİRİŞ

User asks: read the current temperature and humidity from the DHT11 on GPIO 4

AJAN
  1. 1

    Sets DHT_PIN=4 or passes 4 as a CLI argument

  2. 2

    Runs sudo python3 scripts/dht/main.py 4

  3. 3

    Captures stdout output

  4. 4

    Parses line 1 as temperature in Celsius and line 2 as humidity percentage

ÇIKIŞ

Temperature: 22.5°C, Humidity: 58%

Gereksinimler

  • Raspberry Pi with GPIO pins
  • DHT11 sensor and 10K pull-up resistor (hardware)
  • RPi.GPIO Python package (pip3 install RPi.GPIO)

Kurulum

clawhub install noahseeger/dht11-temp

CLI komutunu çalıştırın ya da istemi Claude Code, Cursor, Codex veya kullandığınız kodlama ajanına yapıştırın.

Bağlantılar