İçeriğe geç
TakoAPI
Becerilere dön

bambu-local

tanguyvans tarafından

Smart Home & IoT
2.1kİndirme sayıları clawskills.sh tarafından bildirilir
2Yıldızlar
0Görüntülenmeler
0 beğeniBu beceriyi beğenmek için giriş yapın
—Henüz değerlendirilmedi
Puanınız

Özet

Control Bambu Lab 3D printers locally via MQTT.

Açıklama

Bu Beceri Ne Yapar

Controls Bambu Lab 3D printers over a local MQTT connection, bypassing the manufacturer's cloud. Supports status checks, print control, temperature adjustments, speed changes, and raw G-code commands. Requires LAN Only Mode enabled on the printer.

Works without Bambu's cloud servers, so printer control stays available during internet outages or when the printer is on an isolated network.

Ne Zaman Kullanılır

  • Check remaining print time without opening Bambu Studio
  • Pause a print when you notice a layer adhesion problem
  • Lower bed temperature mid-print to reduce warping
  • Turn the chamber light off after a print finishes
  • Switch print speed to Silent mode during an overnight job

Örnek İş Akışı

GİRİŞ

User asks: what's the current status of my printer?

AJAN
  1. 1

    Reads printer IP, access code, and serial from config.json

  2. 2

    Connects to the printer via local MQTT

  3. 3

    Subscribes to the printer's status report topic

  4. 4

    Parses the returned payload for print state, temperatures, and progress

  5. 5

    Returns a summary of current printer status

ÇIKIŞ

Printer is printing layer 42/120, nozzle at 200°C, bed at 60°C, 35% complete

Gereksinimler

  • Printer local IP address
  • Access code from printer Settings → LAN Only Mode
  • Printer serial number from printer Settings → Device

Kurulum

clawhub install tanguyvans/bambu-local

CLI komutunu çalıştırın ya da istemi Claude Code, Cursor, Codex veya kullandığınız kodlama ajanına yapıştırın.

Bağlantılar