İçeriğe geç
TakoAPI
Becerilere dön

bambu-cli

tobiasbischoff tarafından

Smart Home & IoT
2.5kİndirme sayıları clawskills.sh tarafından bildirilir
9Yıldızlar
0Görüntülenmeler
0 beğeniBu beceriyi beğenmek için giriş yapın
—Henüz değerlendirilmedi
Puanınız

Özet

Operate and troubleshoot BambuLab printers with the bambu-cli.

Açıklama

Bu Beceri Ne Yapar

Controls BambuLab 3D printers from the command line via MQTT, FTPS, and camera protocols. Covers print lifecycle management, file transfers, hardware controls (temperatures, fans, light, motion), calibration, and live monitoring.

Automates and scripts printer operations that would otherwise require manual interaction through the BambuLab app or touchscreen.

Ne Zaman Kullanılır

  • Starting a print job from a remote SSH session
  • Checking printer status in a CI/CD pipeline
  • Taking a camera snapshot mid-print without opening the app
  • Uploading and managing gcode files on the printer
  • Running bed leveling calibration before a long print

Örnek İş Akışı

GİRİŞ

User asks: start printing my_part.3mf on plate 2 and watch the status

AJAN
  1. 1

    Verify printer profile is configured with bambu-cli config list

  2. 2

    Upload and start the print: bambu-cli print start my_part.3mf --plate 2

  3. 3

    Confirm the print started successfully from command output

  4. 4

    Begin periodic monitoring: bambu-cli watch --interval 10

ÇIKIŞ

Print job started on plate 2; live status updates show layer progress, temperatures, and estimated time remaining

Gereksinimler

  • BambuLab printer access code (obtained from printer network settings)
  • bambu-cli installed

Kurulum

clawhub install tobiasbischoff/bambu-cli

CLI komutunu çalıştırın ya da istemi Claude Code, Cursor, Codex veya kullandığınız kodlama ajanına yapıştırın.

Bağlantılar