Bỏ qua tới nội dung
TakoAPI
Quay lại kỹ năng

dirigera-control

bởi falderebet

Smart Home & IoT
1.9kLượt tải do clawskills.sh công bố
2Sao
0Lượt xem
0 lượt thíchĐăng nhập để thích kỹ năng này
—Chưa có đánh giá
Đánh giá của bạn

Tóm tắt

Control IKEA Dirigera smart home devices.

Mô tả

Kỹ năng này làm gì

Controls IKEA Dirigera smart home devices including lights, outlets, and scenes via the Dirigera hub API. Supports brightness, color temperature, outlet switching, and scene triggering. Accessible remotely through a Cloudflare tunnel.

Provides programmatic control over the full Dirigera device ecosystem without needing the IKEA Home Smart app or manual interaction.

Khi nào nên dùng

  • Turn off all lights when leaving home
  • Trigger a bedtime scene across multiple rooms
  • Check battery levels on smart controllers
  • Dim bedroom light to a specific brightness
  • Turn on a connected outlet for a device

Quy trình ví dụ

ĐẦU VÀO

User asks: Set the bedroom light to warm white at 50% brightness

AGENT
  1. 1

    Connect to the Dirigera hub using stored token and IP address

  2. 2

    Retrieve the bedroom light by name with hub.get_light_by_name()

  3. 3

    Check device.is_reachable before sending commands

  4. 4

    Set brightness to 50 with light.set_light_level(light_level=50)

  5. 5

    Set color temperature to 2700K with light.set_color_temperature(color_temp=2700), then call light.reload()

ĐẦU RA

Bedroom light is now on at 50% brightness with warm white color temperature

Yêu cầu

  • Dirigera hub IP address (from router DHCP list)
  • Dirigera API token (generated by pressing physical button on hub)

Cài đặt

clawhub install falderebet/dirigera-control

Chạy lệnh CLI, hoặc dán prompt vào Claude Code, Cursor, Codex hay coding agent bạn đang dùng.

Liên kết