Bỏ qua tới nội dung
TakoAPI
Quay lại kỹ năng

dht11-temp

bởi noahseeger

Smart Home & IoT
398Lượt tải do clawskills.sh công bố
2Sao
0Lượt xem
0 lượt thíchĐăng nhập để thích kỹ năng này
—Chưa có đánh giá
Đánh giá của bạn

Tóm tắt

Read temperature and humidity from DHT11 sensor.

Mô tả

Kỹ năng này làm gì

Reads temperature and humidity from a DHT11 sensor connected to a Raspberry Pi. The GPIO pin is configurable via CLI argument or environment variable, defaulting to pin 19.

Supports both CLI argument and environment variable pin configuration, making it easy to use in automated scripts without editing code.

Khi nào nên dùng

  • Logging greenhouse temperature every 30 minutes via cron
  • Monitoring humidity in a server room or basement
  • Building a home weather station with a Pi
  • Alerting when humidity exceeds a threshold in a script
  • Capturing sensor data to a file for later analysis

Quy trình ví dụ

ĐẦU VÀO

User asks: read the current temperature and humidity from the DHT11 on GPIO 4

AGENT
  1. 1

    Sets DHT_PIN=4 or passes 4 as a CLI argument

  2. 2

    Runs sudo python3 scripts/dht/main.py 4

  3. 3

    Captures stdout output

  4. 4

    Parses line 1 as temperature in Celsius and line 2 as humidity percentage

ĐẦU RA

Temperature: 22.5°C, Humidity: 58%

Yêu cầu

  • Raspberry Pi with GPIO pins
  • DHT11 sensor and 10K pull-up resistor (hardware)
  • RPi.GPIO Python package (pip3 install RPi.GPIO)

Cài đặt

clawhub install noahseeger/dht11-temp

Chạy lệnh CLI, hoặc dán prompt vào Claude Code, Cursor, Codex hay coding agent bạn đang dùng.

Liên kết