Bỏ qua tới nội dung
TakoAPI
Quay lại kỹ năng

bambu-local

bởi tanguyvans

Smart Home & IoT
2.1kLượt tải do clawskills.sh công bố
2Sao
0Lượt xem
0 lượt thíchĐăng nhập để thích kỹ năng này
—Chưa có đánh giá
Đánh giá của bạn

Tóm tắt

Control Bambu Lab 3D printers locally via MQTT.

Mô tả

Kỹ năng này làm gì

Controls Bambu Lab 3D printers over a local MQTT connection, bypassing the manufacturer's cloud. Supports status checks, print control, temperature adjustments, speed changes, and raw G-code commands. Requires LAN Only Mode enabled on the printer.

Works without Bambu's cloud servers, so printer control stays available during internet outages or when the printer is on an isolated network.

Khi nào nên dùng

  • Check remaining print time without opening Bambu Studio
  • Pause a print when you notice a layer adhesion problem
  • Lower bed temperature mid-print to reduce warping
  • Turn the chamber light off after a print finishes
  • Switch print speed to Silent mode during an overnight job

Quy trình ví dụ

ĐẦU VÀO

User asks: what's the current status of my printer?

AGENT
  1. 1

    Reads printer IP, access code, and serial from config.json

  2. 2

    Connects to the printer via local MQTT

  3. 3

    Subscribes to the printer's status report topic

  4. 4

    Parses the returned payload for print state, temperatures, and progress

  5. 5

    Returns a summary of current printer status

ĐẦU RA

Printer is printing layer 42/120, nozzle at 200°C, bed at 60°C, 35% complete

Yêu cầu

  • Printer local IP address
  • Access code from printer Settings → LAN Only Mode
  • Printer serial number from printer Settings → Device

Cài đặt

clawhub install tanguyvans/bambu-local

Chạy lệnh CLI, hoặc dán prompt vào Claude Code, Cursor, Codex hay coding agent bạn đang dùng.

Liên kết