bambu-local
由 tanguyvans 提供
Smart Home & IoT简介
Control Bambu Lab 3D printers locally via MQTT.
描述
该技能的功能
Controls Bambu Lab 3D printers over a local MQTT connection, bypassing the manufacturer's cloud. Supports status checks, print control, temperature adjustments, speed changes, and raw G-code commands. Requires LAN Only Mode enabled on the printer.
Works without Bambu's cloud servers, so printer control stays available during internet outages or when the printer is on an isolated network.
何时使用
- Check remaining print time without opening Bambu Studio
- Pause a print when you notice a layer adhesion problem
- Lower bed temperature mid-print to reduce warping
- Turn the chamber light off after a print finishes
- Switch print speed to Silent mode during an overnight job
示例工作流
User asks: what's the current status of my printer?
- 1
Reads printer IP, access code, and serial from config.json
- 2
Connects to the printer via local MQTT
- 3
Subscribes to the printer's status report topic
- 4
Parses the returned payload for print state, temperatures, and progress
- 5
Returns a summary of current printer status
Printer is printing layer 42/120, nozzle at 200°C, bed at 60°C, 35% complete
前置要求
- Printer local IP address
- Access code from printer Settings → LAN Only Mode
- Printer serial number from printer Settings → Device
安装
clawhub install tanguyvans/bambu-local运行 CLI 命令,或把这段提示词粘贴到 Claude Code、Cursor、Codex 或你在用的任意编程智能体里。